The Operating System Required; The Network - Sennheiser SDC 8000 SYS Software Manual

The operating system required

The SDC 8000 software requires Windows NT, Windows 2000 or Windows
XP Professional.
Note:
Both programs ("Confsys" to control the conference system and
"IntSys" to control the interpretation system) require one
port each (RS 232 interface)! The SDC 8000 software therefore does
not function on PCs which do not have at least one free COM port not
assigned to another software – e.g. Hotsync (software for data transfer
between a PC and a Palm PDA)!

The network

You can install the software on up to eight PCs in a network. One of these
PCs must be configured as the "master" (see "Configuring the PC in a
network" on page 35). The master PC gives you access to all functions of
the conference and interpretation system. The dongle must be inserted
into a free USB port of the master PC.
Up to two PCs can be configured as "slaves" (see "Configuring the PC in a
network" on page 35). A slave PC also gives you access to all functions. The
slave PCs do not require a dongle.
Up to five PCs can be configured as "video PCs" (see "Configuring the PC in
a network" on page 35). A video PC does not give you access to the
functions of the conference and interpretation system. Projectors or
monitors connected to the video PCs are only for displaying data to the
delegates or guests. The video PCs do not require a dongle either.
Slave
Video
Video
System requirements
Dongle
Master
LAN
Video
free COM
Slave
Video
Video
13