Locking The Interpreter Manangement Software; Initializing The Interpreter Consoles - Sennheiser SDC 8000 SYS Software Manual

In the "Old Password" box, enter the current password (see "The two
passwords" on page 11).
In the "New Password" box, enter the new password.
In the "Confirm Password" box, re-enter the new password.
Click the "OK" button to save the new password; click the "Cancel",
button to keep the current password.

Locking the Interpreter Manangement software

If you need to leave your PC during a conference, you can secure your
interpretation configuration and prevent unauthorized use by locking the
software:
From the "Configuration" menu, choose "Lock Application".
The password dialog box opens.
Enter the password and click the "OK" button.
The Interpreter Management software is locked.
To unlock the Interpreter Management software:
From the "Configuration" menu, choose "Lock Application".
The password dialog box opens.
Enter the password and click the "OK" button.
The Interpreter Management software is unlocked.

Initializing the interpreter consoles

After your interpretation configuration has been created and all options
have been set, you first have to transmit the configuration to the central
unit and then initialize the interpreter consoles.
To transmit the configuration to the central unit:
In the palette, click the "Send" button.
The "SDC8000 S-IM" dialog box opens.
Configuring the interpretation system
83