Tps 300 Software Connection Via Modem - THOMSON MEC 310#GENSET CONTROLLER Installation And Operation Manual

If a TPS 300 software connection is required, then the SIM card must support
data transfer. Contact your GSM provider for details.
TPS 300 software
Press the application settings push-button.
The settings dialog box appears:
Select modem and key in the telephone number of your GSM modem connected to the unit.
In the above example the modem is selected automatically by the TPS 300
software (internal modem in the PC).
When you want to use modem dial-up, the TPS 300 software must also be set to run ASCII 7 bits
data communication:
PM075 REV 2 09/08/20
MEC 310 GENSET CONTROLLER

TPS 300 software connection via modem

Page 76 THOMSON TECHNOLOGY