Edit Mode - TurboChef encore Service Manual

Edit Mode

From Edit Mode, the operator can change menu
settings and rename food groups and items.
To access the Edit Mode,
1. Enable it from the options screen (Figure 7,
page 13).
2. Press the on/off key to return to the
"Cooling Down" or "off" screen.
3. Press the on/off key again to enter Edit Mode.
In Edit Mode, editing can be performed on two
screens. The first is explained on this page (Figure
14). It allows the operator to:
- Edit the set temperatures
- Select baking stone use
- Set the offset temperatures
- Select whether to edit temperature 1 food
groups or temperature 2 food groups
The second screen is explained on page 18, and
allows editing group and item names, as well as
specific item settings.
Set Temperature Edit
The set temperature should never be changed to
compensate for over-cooking or under-cooking. If
recipe settings are not cooking as desired, consult
your menu developer, authorized distributor, or
TurboChef Customer Support.
To change a set temperature,
1. Place the oven in Edit Mode (see above).
2. Change the temperature:
a. Select "TEMP 1" to change the
temperature for groups 1-8
b. Select "TEMP 2" to change the
temperature for groups 9-16
c. using the number keys, enter the new set
temperature.
d. The temperature range is 300–540°F
(149–282°C)
3. Press the Enter key to confirm the change, or
the back/Stop key to cancel.
baking Stone use yES/nO:
The "Stone" option on the Set Temperature screen
should be set to:
- "Yes" if a baking stone is being used
- "No" if only a wire rack is being used
"Yes" increases the temperature of the bottom half
of the oven for optimal cooking results when a stone
is being used.
bottom Temperature Offset
There are two bottom Temperature offset keys:
one for each temperature. The bottom temperature
offset keys allow the bottom heater to provide
additional heat for increased browning.
To change a temperature offset,
1. Place the oven in Edit Mode (see adjacent).
2. Change the temperature offset:
a. Select "bottom temp 1 offset" to change
the temperature offset for groups 1-8.
b. Select "bottom temp 2 offset" to change
the temperature offset for groups 9-16.
c. using the number keys, enter the new
temperature offset.
d. The temperature range is 0-75°F (0-24°C).
3. Press the Enter key to confirm the change, or
the back/Stop key to cancel.
Select Groups and Items to Edit
Select "Edit temp 1 Groups" to edit recipe settings
and/or group and item names for groups 1-8. or,
select "Edit temp 2 Groups" for groups 9-16. See
page 18 for more information.
figure 14: Edit Mode Screen 1:
Temperature and Group Select
17