On-Board Connectors - Analog Devices EVAL-ADAQ7767-1 User Manual

User Guide
EVALUATION BOARD HARDWARE

ON-BOARD CONNECTORS

Table 4 provides information about the external on-board connectors on the EV-ADAQ7767-1FMC1Z.
Table 4. On-Board Connectors
Connector Function
AINP/AINN SMB analog inputs for AC signals
T1/T2 Turrets for DC analog inputs
IEPE_IN SMA for the IEPE sensor input
MCLK SMB for the external MCLK
P5 FMC connects all digital signals to the
P6 PMOD connector allows the user to interface with the board
LDO_OUT Turret to connect to the external voltage reference input and voltage reference buffer supply
3V3 Turret to connect to the external 3.3 V supply
5V3 Turret to connect to the external 5.3 V supply
VDD2_ADC Turret to connect to the external VDD2_ADC supply
EXT_VDD Turret to connect to the external positive supply for the buffers and/or the IEPE interface
EXT_VSS Turret to connect to the external negative supply for the buffers
analog.com
SDP-H1 controller board
EVAL-ADAQ7767-1
Rev. 0 | 14 of 26