Table of Contents
Advertisement
Many malfunctions and faults that can occur in daily operation can be easily
remedied. You can save time and money in many cases, as you do not need to call
the the Miele dealer.
The following tables are designed to help you to find the cause of a malfunction or a
fault and to resolve it.
Messages on the display
Issue
F10
F11
F20
F32
F55
F138
Cause and remedy
The suction hose in the water container is not
inserted correctly or not vertical.
Correct the position of the suction hose:
The drain hoses are blocked.
Descale the combination steam oven (see
"Cleaning and care" – "Care").
If the fault message appears again, contact your
Miele dealer.
The door has not locked for cleaning with
Switch the combination steam oven off and back
on again.
If the fault message appears again, contact your
Miele dealer.
The maximum operating time for an operating mode
has been exceeded and the auto switch off has been
triggered.
Switch the combination steam oven off and back
on again.
The combination steam oven is ready to use again
immediately.
The combination steam oven is leaking. Water has run
into the floor tray.
Switch the combination steam oven off and back
on again.
If the fault message appears again, contact your
Miele dealer.
Problem solving guide
.
HydroClean
157
Advertisement
Table of Contents
