Table of Contents
Advertisement
Switching on Crisp function
The
function has to be
Crisp function
switched on separately for each cooking
programme.
You have selected a function and the
required settings such as the
temperature.
You want to switch on the
function for this cooking
function
programme.
Drag down the pull-down menu.
Depending on the colour scheme,
is highlighted in either black or
function
white.
Select
Crisp function
is highlighted in orange.
Crisp function
Close the pull-down menu.
The
function is switched
Crisp function
on.
The
function can be
Crisp function
switched off again at any time via the
pull-down menu.
Crisp
Crisp
.
Releasing bursts of steam
You can release bursts of steam during
the cooking process in all oven
functions (except
number of bursts of steam is unlimited.
You can release a burst of steam as
soon as
Burst of steam
is shown in green.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Select
.
Start
The steam will be released. It will take
approximately 1 minute.
Proceed as described to release
further bursts of steam once
shown in green again.
Changing the function
You can change to another function
during a cooking programme.
Touch the symbol for the selected
function.
If you have set a cooking duration,
confirm the
Cancel process?
with
.
Yes
Select the new function.
The new function appears in the display
with its corresponding recommended
values.
Set the values for the cooking
programme and confirm with OK.
Operation
). The
Eco Fan heat
appears and
Start
message
Start
is
67
Advertisement
Table of Contents
