Cleaning The Side Runners - Miele 12 209 990 Operating And Installation Instructions

Cleaning the side runners

The side runners can be removed
together with the FlexiClip runners (if
inserted).
If you want to remove the FlexiClip
runners separately beforehand, please
follow the instructions in "Fitting and
removing FlexiClip runners" in the
"Guide to the appliance" chapter.
The surfaces of the HFC 71 FlexiClip
runners have been treated with
PerfectClean.
Please see "PerfectClean" in
"Cleaning and care" for instructions
on cleaning.

Risk of injury caused by hot
surfaces.
The combination steam oven gets
hot during operation. You could burn
yourself on the heater elements, oven
compartment or accessories.
Allow the heater elements, oven
compartment and accessories to
cool before removing the side
runners.
 Pull the side runners out of holder (1.)
from the front and remove them (2.).
Cleaning and care
 Remove:
- Light soiling with a clean sponge and
a solution of washing-up liquid and
hot water
- Stubborn soiling with a clean
dishwashing sponge, hot water and a
little washing-up liquid If necessary,
you can also use the rough side of the
sponge.
 After cleaning, wipe the surface with
clean water to remove any cleaning
agent residues.
 Then dry the side runners with a
cloth.
Reassemble by following these
instructions in reverse order.
 Refit the side runners carefully.
If the side runners are not correctly
inserted, there is no anti-tip
protection. The temperature sensor
could also be damaged when cooking
containers are placed in the steam
oven.
147