Many malfunctions and minor faults that can occur in daily operation can be
corrected without contacting Miele. This will save you time and money because
you will not need a service call.
You can find information on how to remedy faults yourself at
www.miele.com.au/service or www.miele.co.nz/service and on the Miele website.
Please note, however, that a call-out charge will be applied to unnecessary service
visits where the problem could have been rectified as described in these operating
instructions.
Messages in the display
Problem
F10
F11
F20
F32
F55
Possible cause and remedy
The suction hose in the water container is not
inserted correctly, or is not vertical.
Correct the position of the suction hose:
The drain hoses are blocked.
Descale the steam combination oven (see
"Cleaning and care - Maintenance").
If the fault message appears again, contact Miele.
The door lock for cleaning with
locking.
Switch the steam combination oven off and back
on again.
If the fault message appears again, contact Miele.
The maximum operating time for an operating mode
has been exceeded and the safety switch-off has
triggered.
Switch the steam combination oven off and back
on again.
The steam combination oven is now ready to use
again.
Problem solving guide
HydroClean
is not
167