Hydraulic Control Unit Use Reference Chart - Kubota B2401DT Operator's Manual

DUAL REMOTE HYDRAULIC CONTROL SYSTEM [B2401DT ONLY]

4. Hydraulic control unit use reference chart

In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information
may not be applicable to all types of implements and soil conditions, it is useful for general conditions.
Soil condition
Implement
Light soil
Moldboard plow Medium soil
Heavy soil
Disc plow
－
Harrower (spike,
springtooth, disc
－
type)
Sub-soiler
Weeder, ridger
Earthmover, digger,
scraper, manure
fork, rear carrier
－
Mower (mid-and
rear-mount type),
hayrake, tedder
B2401DT, B2401DTWO, B2401DTN
Top link mounting
holes
(1) position control
lever
Hole 1
*Hole 2 is used only
when there is some
Position control
obstacle that pre-
vents you from us-
ing the hole1.
Telescopic stabil-
Gauge wheel
izers
Yes/no Loose
Yes
Tighten
Yes/no
HYDRAULIC UNIT
Remarks
Insert the set-pin
through the slot on
the outer tube that
align with one of the
holes on the inner
bar.
For implements with
gauge wheels, low-
er the implements
to the ground.
Telescopic stabilizer
should be tight
enough to prevent
excessive imple-
ment movement
when implement is
in raised position.
For implements with
gauge wheels, low-
er the implements
to the ground.
49