Pto; Pto Operation; Pto Clutch Control Lever; Pto Clutch Indicator - Kubota M6S-111 Operator's Manual

PTO

PTO

PTO OPERATION

WARNING
To avoid personal injury or death:
• Disengage the PTO, stop the engine, and allow
all rotating components to come to a complete
stop before connecting,
adjusting, or cleaning
equipment.

1. PTO clutch control lever

1. The tractor has a 540 rpm speed position and 6-
spline shaft.
2. The PTO clutch
disengages the PTO clutch which gives the PTO
independent control.
• Shift the lever to "ON" to engage the PTO
clutch.
• Shift the lever to "OFF" to disengage the PTO
clutch.
(1) PTO clutch control lever
IMPORTANT :
• To avoid shock loads to the PTO, reduce
engine speed when engaging the PTO, then
open the throttle to the recommended
speed.
• To avoid damage to the PTO clutch and
implement, shift the PTO clutch control lever
slowly when engaging the PTO clutch. Do
not keep the PTO clutch control lever at the
halfway point.
Proper warm up is strongly recommended in
cold weather.
100
disconnecting,
any PTO driven
control lever engages
"ON"
"OFF"
Do not continuously shift the PTO clutch
control lever.
Engine speed rpm
2405
NOTE :
• Tractor engine will not start if the PTO clutch
control lever is in the engaged "ON"
position.
• If the PTO system is engaged and the
operator stands up from the seat, the
warning buzzer will whistle for about 10
seconds after standing up. This is because
the tractor is equipped with an "operator
presence control system".
or

2. PTO clutch indicator

The PTO clutch indicator turns on while PTO clutch
control lever is in "ON" (engage) position.
(1) PTO clutch indicator
PTO OPERATION
PTO speed rpm
540
M6S-111,M6L-111,M6H-101