Advertisement
E
E1) Opening the door slightly, slide rod into swivel arm and then close the door
E2) With the door closed, position the swivel arm so that it is 90º to the door surface
E3) Tighten the arm screw securely
F
Adjust closer as required (See page 8 for details).
ACCESSORIES INFORMATION
1430-J COVER PLATE
MAY BE USED WHEN CLOSER IS MOUNTED
ON A NARROW RAIL TO IMPROVE APPEARANCE
WHEN CLOSER IS VIEWED THRU GLASS
STANDARD APPLICATION
INDEX MARK
ON SPINDLE
POSITION OF MAIN
ARM WHEN ASSEMBLING
TO SPINDLE
1431-W corner bracket closer is mounted on bracket which is attached to door jamb
on stop side of door
Use this application for exterior doors to keep the closer inside of building; Also may be
used to obtain full 180ϒ door opening
MORTISE NUTS FOR BOLTING THRU THE DOOR ARE FURNISHED WHEN ORDERED
RIGHT HAND DOOR
ARM
SCREW
ROD
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
90ϒ
HOLD
OPEN ARM
H8 MORTISE FOOT
FOR USE WHERE THE
STANDARD SURFACE
APPLIED FOOT CANNOT
BE ATTACHED TO THE
TOP CASING OR WHERE
APPEARANCE IS A
MAJOR FACTOR
A7140F
3
Advertisement
