Table of Contents
Advertisement
8
MAINTENANCE
Periodic inspection and maintenance
The lawnmower must be periodically inspected and maintained for safety and to keep it running at a high
level of performance.
Periodic maintenance will also help to extend service life.
The required service intervals and the kind of maintenance to be performed are described in the following chart.
Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will
be able to perform a variety of checks and software updates that cannot be completed by the owner.
Maintenance schedule
REGULAR SERVICE PERIOD
Perform at every indicated period or operating hour interval,
whichever comes soonest.
Blade
& Blade nut
*
Blade disc
Motor housing boot
Charge socket
Manual stop button
Covers
Body parts
Work motor
Traction motor
Machine
Traction motor (wheel axles)
Wheels
Caster & bearing
Cover Mount Stracture
Obstruction sensor (Mount Cap /
Mount Shaft)
Battery condition
Breather
Docking station
Docking
Docking station (Screws)
station
Docking station (Connectors)
* Blades, the blade nuts, the blade bolts, the blade disc, body parts, the front (caster) wheels, and the rear (drive) wheels should be replaced as needed.
(1) These items should be serviced by your servicing dealer. Please contact your service dealer.
(2) If the screws become loose, tighten them securely.
(3) Confirm using 10 last charges history.
(4) Measure this item, please replace if necessary.
(5) Use a soft brush and cloth. After cleaning, make sure check the boots which are not damaged.
Maintenance procedures
Dirt and grass may accumulate on the top and bottom of the lawnmower during and after mowing, and the
blades may become worn, damaged, or unable to turn. Make sure to check the lawnmower according to
the chart in "Periodic inspection and maintenance" (M page 91).
N WARNING
- Make sure to press the manual STOP button and press the B (Off) button to turn the power off
before performing the following procedures.
- Put on a pair of work gloves before performing the following procedures.
- Be careful when performing the following procedures, because blades are extremely sharp.
NOTE:
- Remove the lawnmower from the docking station when performing the following procedures.
Check
*
Check
*
Check or clean
Check or clean
Replace
Check
Clean
Check
*
Clean
Check
Check or clean
Check or clean
Check (grease) or clean
Check or clean
Replace
Check or clean
Replace
Clean
Check
Replace
Check
Check
Clean
Check
Check-Tightness
Clean
Check
Periodic inspection and maintenance / Maintenance procedures
Every year or every 1350h
Every
week
™
™
(5)
™
™
™
™
™
™
™
(2)
™
operating hours.
Page
(Cutting time)
(M page 99)
(M page 99)
(M page 98)
(M page 98)
If necessary
–
(1)
(M page 93)
™
–
–
(1)
™
(M page 92)
–
(1)
™
–
(1)
™
–
(1)
™
–
(1)
™
(M page 97)
If necessary
–
(1)
(M page 97)
If necessary
–
(1)
–
(1),(5)
™
–
(1)
™
If necessary
–
(1),(4)
–
(1),(3)
™
–
(1)
™
(M page 93)
(M page 94)
™
(M page 96)
(M page 93)
™
(M page 96)
™
91
Advertisement
Table of Contents
