Table of Contents
Advertisement
3.
Setting the start points
Through this setting, you can set the starting point to operate the lawnmower.
If you set the start points and combine them with the settings of work timer, you can effectively mow your
garden.
Select [3.Start points] and press the
1
3-
to configure the start points.
Start points screen is displayed.
Select [Yes] or [No] to the question on the addition
2
3-
of the start points and press the H button.
If you select [Yes], go to step 3-3.
If you select [No], no start point is added and the setup
wizard top screen is displayed.
NOTE:
- When selecting [No], [3.Start points] and [4.Test
start points] are checked on the setup wizard top
screen.
- When selecting [No], the lawnmower will always
start mowing from the docking station.
Select any point and press the
3
3-
The setting screen for the point to be set is
displayed.
4
Select S1 (Shortcut wire 1), (Clockwise),
3-
clockwise) or S2 (Shortcut wire 2), enter the values
of the distance from the docking station to start
cutting, and enter a percentage of the ratio which
the lawnmower operates.
Repeat the above operation for the starting points which
you want to configure.
Allocate to each start point so that the total utilization
rate is 100%.
NOTE:
- You can configure 5 start points.
- Input the usage percentage for each start point
based on how often the lawnmower should start
from this point once charged.
- Start point does not define a specific area of
mowing. It ensures the lawnmower can reach
areas difficult to access in your garden.
Select [NEXT] and press the H button.
5
3-
The configuration of mowing start points is completed.
The setup wizard top screen is displayed and [3.Start
points] is checked.
NOTE:
- You can modify again the settings through the
setup wizard.
button
Setup wizard
H
1. Cutting hei ght
2. Garden lay ou t
3. Start points
4. Tes t s tart points
5. Work timer
Start points
Are additional
s tart point s needed?
Yes
button.
H
Start points
(Anti-
Point S 1
1
2
TIPS
For details, refer to "Start points" (M page 41).
Start points
Point S 1
1
2
Shortcut wire 1/
Clockwise/
Anti-clockwise
Setting up the lawnmower
/
/
/
S2
(0 - 700m)
/
/
/
0 m
100%
/
/
/
0 m
How to read the above screen
/
/
/
S2
(0 - 700m)
/
/
/
0 m
100%
/
/
/
0 m
Distance to
Percentage
start point
to select each
start point
3/5
3/5
N o
3/5
0%
0%
29
Advertisement
Table of Contents
