Honda HRM4000EC Owner's Manual page 21

Installation
With shortcut wires
Shortcut wire 2
*: more than 30 cm apart
Example of incorrect installation
Example 1
Example 2
Example of narrow passage installation
Select Pattern 2 or Pattern 3 for the following example.
18
Image
* *
*
1 m or more in
a straight line
Shortcut wire 1
Obstacle
1 m – 3 m
Condition
Lay the boundary wire around 30 cm or more
apart from the docking station sides.
Lay the boundary wire and the shortcut wire
with an interval of 30 cm or more.
Lay the shortcut wire at least 1m straight away
from the docking station's back.
NOTE:
- Do not cross the shortcut wire 1 and 2.
Example 1
Do not run the boundary wire underneath the
docking station.
Example 2
Do not place obstacles beside the docking
station. Obstacles must be separated from the
wire by a distance of 30 cm or more.
Narrow passage installation
• A narrow passage is one in which the distance
between wires is 3 m or less.
• Do not make the distance between wires 1 m
or less.
NOTE:
- For narrow passage installations, do not select
docking direction Pattern 1.