Honda HRM4000EC Owner's Manual page 48

Distance from the boundary wire when the lawnmower goes toward
the mowing start points:
The lawnmower moves between the boundary wire and the specified value at random as it goes toward
the start point.
When setting the proper passage width
Direction
with start
point
High value
Boundary wire passage width sample table
Boundary wire
Setup level Passage width
0
1
2
3
4
5
6
7
8
9
10
11
12
Passage width: From wire to middle of the lawnmower
NOTE:
- The field strength varies depending on the length of the boundary wire and the shortcut wire. The field
becomes weaker with a longer wire, and stronger with a shorter wire.
- When the range of values are high (by avoiding moving along the same path), you can avoid creating
wheel tracks in the grass.
- The numerical values of this table are for reference to return the lawnmower to the docking station along
a straight line.
- The numerical values may differ depending on the actual conditions.
When the passage width is set too high
Narrow passage
Direction
Low value
with start
point
NOTE:
- When the value is too high, lawnmower may not
pass through narrow passage.
Laying the shortcut wire is effective when the
lawnmower passes through narrow passages.
Shortcut wire
Setup level
10 cm 1
25 cm 2
30 cm 3
35 cm 4
40 cm 5
50 cm 6
60 cm 7
70 cm 8
80 cm 9
90 cm 10
100 cm 11
110 cm 12
130 cm
Middle of the
lawnmower
Passage width
The boundary wire or
the shortcut wire
Setting the lawnmower operation
Narrow passage
Value is too high
Passage width
25 cm
30 cm
35 cm
40 cm
50 cm
60 cm
70 cm
80 cm
90 cm
100 cm
110 cm
130 cm
45