Table of Contents
Advertisement
Manual setup
TIPS
Avoid cutting too much at once. Mow gradually step by step.
Avoid cutting more than 5 mm of grass at once. If you want to cut more than 5 mm, it should be
done gradually in steps of 5 mm maximum per week. Example: decreasing from 50 to 30 mm
should require 4 weeks with 5 mm steps.
Home screen
[2.Manual setup]
Alternatively, select
in the Top screen and press
the
button.
H
You can configure the cutting height.
NOTE:
- We recommend that you set a height that cuts off
5 mm from the grass height.
- We recommend that your lawn is cut to a height of
less than 65 mm before using the lawnmower.
Menu screen
[2.Garden setup]
J
Setting the lawnmower operation
Press the G button, previous screen.
4
12:02 Sat 25/NOV
Cutting height
1.Auto setup
2.Manual setup
Cutting height
35 (20-60)
[4.Cutting height]
J
1
Set the cutting height with the
buttons and press the H button.
When you select [Calibrate] and press the
2
H button, the blade disc moves to the set
cutting height. You can check the cutting
height.
- The moved blade disc makes latching
sounds at the highest and lowest position,
this is normal.
Press the G button, previous screen.
3
12:02 Sat 25/NOV
Cutting height
1.Auto setup
2.Manual setup
Cutting height
35 (20-60)
J
61
Advertisement
Table of Contents
