Checking The Lawnmower; Turning On / Off The Power - Honda HRM4000EC Owner's Manual

Connecting to a power source / Checking the lawnmower / Turning on / off the power
Attach the station cover to the docking station.
4
N CAUTION
Do not secure the power cord with the pegs used to
secure the boundary wire. Doing so may damage the
power cord.
Connect the AC adapter plug to a power outlet with the designated voltage.
5
Power outlet voltage for the EC and SC types: AC 230 V
Power outlet voltage for the BC type: AC 240 V

Checking the lawnmower

Before operation, check to make sure that it is connected all the way into the docking station.
N CAUTION
- Do not touch the recharging connector. If you touch it, you may become injured.
NOTE:
- If the lawnmower is not correctly connected to the docking station, the battery cannot recharge.

Turning on / off the power

Turning on the power
After the battery is charged, press the A (On) button to turn on the lawnmower.
The A (On) button is located on the control panel.
N WARNING
-­ ­ Do­not­insert­your­finger­beneath­the­closed­operation­panel­cover.
- When stopping the lawnmower, approach it from the back. Approaching it from the front or
sides may lead to unintended contact with the lawnmower, and you may fall over it when the
78
lawnmower begins to move.
The light above the charging plug changes as follows:
LED
Green The docking station signal setting is correct.
Green The boundary wire is too long.
(blinking) The shortcut wire becoming disconnected.
Amber The lawnmower is correctly connected to
the docking station.
Amber The boundary wire becoming
(blinking) disconnected.
Red Confirm the connection of the connectors
(M page 96).
If the connection is normal, the docking
station may be malfunctioning. Contact
your dealer.
Red A station signal problem—such as the
(blinking) station wire becoming disconnected or
cut—has occurred. Contact your dealer.
Off Confirm the connection with the power cord.
If the docking station is correctly
connected with the power cord, a power
failure has occurred. Contact your dealer.
Description