Honda HRM4000EC Owner's Manual page 96

Cleaning the docking station
N WARNING
- Unplug the AC adapter's plug from the power outlet (House) before cleaning it.
NOTE:
- Do not wash the docking station with water. The docking station may be damaged.
Clean dirt and grass off of the docking station using a plastic brush.
Brush off dirt and grass from docking station, particularly around
parts on which the lawnmower rests and around the charging plugs area:
Charging plug
(Upper)
Checking
Checking the manual STOP button
N WARNING
- Do not touch the blades with your hands.
- Do not lift the lawnmower off of the ground while checking or cleaning it.
Check item(s)
Manual STOP button and
control panel cover
Press the A (On) button on the control panel.
1
Test a start point (M page 63).
2
When the lawnmower is moving, press the manual
STOP button and check that the lawnmower
stops.
Normal operation of the
manual STOP button (and
the control panel cover)
Maintenance procedures
Charging plug
(Lower)
Action
While performing a test operation of the
lawnmower, press the manual STOP button. If
the lawnmower does not stop (and the control
panel cover does not open), consult your
dealer.
93