Honda HRM4000EC Owner's Manual page 12

Robotic lawnmower
Table of Contents

Advertisement

• Always press the manual STOP button first before you physically
interact with the lawnmower. If you do not, you may become injured,
prevent the lawnmower from connecting to the docking station, or
stop the lawnmower's operation.
• When performing maintenance on the lawnmower, make sure
to press the manual STOP button and stop the lawnmower from
moving. If the lawnmower is moving, an accident may occur.
• In case of person injury, all the power circuits must be disconnected.
Call local emergency medical services.
• Before operation, always check the work area and remove any
branches, rocks, and other objects that can damage the blades and
cause the lawnmower to stop. If you do not, you may be injured from
objects that are ejected from the bottom of the lawnmower, or the
lawnmower may become damaged.
• Do not operate the lawnmower on dirt or gravel. Foreign matter may
fly out and the cutting blade may be damaged.
• Lay the boundary wire so that it is held firmly in place, and perform periodic checks after laying it to
ensure that it has not slackened. If the boundary wire protrudes from the ground, you or someone else
may trip on it and fall.
• To prevent the lawnmower from falling, divide the work area with a fence or something similar if it is close
to a pond, cliff, etc. The height must be at least 15cm.
• When connecting with the boundary wire, use the supplied connector.
• After confirming that all wires are connected to the docking station, connect the AC adapter to an outlet.
• Install the AC adapter in a place that is out of direct sunlight and does not get wet even in the rain.
IP55 is applicable to the adaptor body except plug part. The plug part must be placed beneath the canopy.
When outdoor use, plug part must be inserted into a waterproof socket.
IP degree of Plug:
ADP-130AR AAC ... IP44 for plug part
ADP-130AR AAD ... IP20 for plug part
ADP-130AR BAS ... IP55 for plug part
Protection class ll appliance (except ADP-130AR BAS)
non-inherently Short-circuit-proof safety isolating AC adapter
Switch mode power supply unit
• Wear gloves when touching the AC adapter because it becomes hot when it is plugged into a power
outlet (house).
• The AC adapter and the mains-socket must all times be easily accessible.
• In case of broken cords or plugs the AC adapter must be disposed.
• The AC adapter should be treated with caution. If you want to clean it, please use only dry cloths or brush.
• Use this AC adapter by children shall be under the full supervision of parents.
• When extending the cord on the output side of the AC adapter, use an extension cord specified by Honda.
• Make sure that the contents of "SAFETY INSTRUCTIONS" are absolutely clear to persons who may
come in contact with the robotic lawnmower. If you do not, an accident may occur.
• People who are not thoroughly familiar with this Owner's Manual should not come into contact with the
lawnmower other than to stop it.
• When approaching the operating lawnmower, pay attention to materials that may be scattered by the blades.
• Do not use the lawnmower if the outer casing is damaged.
The blade may accidentally cut you or you may be injured by debris thrown off by the blade.
Disposal
To protect the environment, do not dispose of this product, battery, etc. carelessly by leaving them in the waste.
Observe the local laws and regulations or consult your authorised Honda dealer for disposal.
Observe the following points for your safety
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrm4000live

Table of Contents