Honda HRM4000EC Owner's Manual page 19

Installation
Example of correct installation
The lines in the illustration are distinguished as follows.
Pattern 1
Without shortcut wires
With shortcut wires
Shortcut wire 2
*: more than 30 cm apart
Pattern 2
Without shortcut wires
16
Image
Boundary wire
Shortcut wire
0 cm or more
*
1 m or more in
a straight line
Shortcut wire 1
/ Pattern 3
5 cm or less
5 cm or less
30 cm or more
Pattern 1: Perpendicular installation
Connect the docking station perpendicular to
the wire.
within 30 cm
Lay the shortcut wires along the side of the
station.
*
Lay the boundary wire and the shortcut wire
with an interval of 30 cm or more.
Lay the shortcut wire at least 1m straight away
from the docking station's back.
NOTE:
- Up to two shortcut wires can be installed.
- Do not cross the shortcut wire 1 and 2.
Pattern 2: Clockwise installation
Connect the docking station parallel to the
boundary wire (in the clockwise direction).
Pattern 3: Anti-clockwise installation
Connect the docking station parallel to the
boundary wire (in the Anti-clockwise direction).
30 cm or more
Condition