Table of Contents
Advertisement
Start points
Home screen
[1.Start points]
Menu
1.Work timer
2.Garden setup
3.Diagnostics
4.History
5.System settings
6.Setup wizard
The lawnmower travels to this location along the
boundary wire or the shortcut wires, and then turns
away from the boundary wire or the shortcut wires
to begin mowing. By setting the start point, you can
start mowing from the desired area.
TIPS
Do not make the distance value longer than it
needs to be. This will shorten the cutting time.
At the start point using the shortcut wire,
the lawnmower will start work from the point
where it joins the boundary wire, so by setting
the distance of the start point longer than the
shortcut wire, you can start work from the
connection point of the shortcut wire.
Set whether the lawnmower
should travel clockwise or anti-
clockwise along the boundary
wire and the shortcut wires to
reach a start point.
Sets the minimum and
maximum distance between
the lawnmower and the
boundary wire when following
the boundary wire or the
shortcut wire.
Menu screen
[2.Garden setup]
J
[1.Point 1] to [5.Point 5]
J
Garden setup
1.Mowing setup
2.Garden layout
3.Homing setup
J
4.Cutting height
Start points
P oint S 1
/
/
(0 - 700m)
1
/
/
/
0 m
2
/
/
/
0 m
Start points
Point
Widt h
1
3 – 10
2
3 – 10
3
3 – 10
4
3 – 10
5
3 – 10
(– 12)
TES T
Setting the lawnmower operation
[1.Mowing setup]
J
Mowing setup
1.Start points
2.Mowing pattern
J
3.Advanced setting
4.GNSS
Select S1(Shortcut wire 1),
1
(Anti-clockwise) or S2 (Shortcut wire
2) enter the values of the distance from
the docking station to start cutting, and
enter a percentage of the ratio which the
lawnmower operates.
Select [NEXT] and press the H button.
2
Enter the values of the width setting and
3
angle, and press the H button.
NOTE:
- By selecting [TEST], you can check
the settings of each start point before
mowing. For details, see "Test start
points" (M page 63).
Press the G button to return to the
4
previous screen.
Sets the distance from the
docking station to start cutting.
/
S2
Set an area operation ratio
if you want to mow more
100%
frequently from a certain start
point.
0%
Set so that the total of all the
percentages is 100%.
When leaving the boundary
wire or the shortcut wire, set
the minimum and maximum
angle to turn from the wire.
Angle
10 – 170
10 – 170
10 – 170
10 – 170
10 – 170
(10' – 170' )
J
12:02 Sat 25/NOV
(Clockwise),
47
Advertisement
Table of Contents
