Adding Hard Disks To A Degraded Raid Configuration - Intel D39172-003 User Manual

Adding or Replacing Hard Disks

Adding Hard Disks to a Degraded RAID Configuration

www.DataSheet4U.com
130
To add a hard disk to a degraded RAID configuration:
1. Insert the hard disk into the storage system.
You can do this whether the storage system is powered on or off.
2. Access the Manager or refresh the browser window.
The Disk Change Notification page appears:
3. Click Ignore to continue rebuilding the disk and return to the Manager.
The Disks page shows the progress of the rebuilding progress.
Alternatively, if the information on this page is not correct, click Scan to scan the
storage system again and update the page.
You can also click Shut Down to shut down the storage system. When you restart the
storage system, this page re-appears.
Intel® Entry Storage System SS4000-E User Guide