Intel D39172-003 User Manual page 82

Managing Your Storage System
www.DataSheet4U.com
66
To change this
The DNS server to use
The IP address(es) used by the
storage system
The DHCP settings
If your network includes a DNS server, and if the first port on
the storage system uses a specified IP address rather than
obtaining one from the DHCP server, enter the primary
IP address in the Preferred DNS server text boxes and the
secondary IP address in the Alternate DNS server text boxes.
If your network does not include a DNS server, or if the first port
obtains its IP address from the DHCP server, leave these text
boxes blank. (If the first port obtains its IP address from a
DHCP server, the DNS server IP address will be obtained from
the DHCP server as well.)
In the Port 1 group box, either select Get an IP address
automatically to obtain the IP address from your DHCP
server, or select Use this IP address and enter the IP address
and subnet mask in the subsequent text boxes.
If your storage system has two Ethernet ports and you're using
the second one, do the same in the Port 2 group box. (This
group box does not appear if your storage system supports
only one Ethernet port.)
If you want to use the storage system as a DHCP server, in the
Port 1 group box, select Use this IP address and enter the
IP address and subnet mask in the subsequent text boxes.
Then select the Enable DHCP server check box, enter the
beginning IP address in the Starting IP address text boxes,
and enter the last IP address in the Ending IP address text
boxes.
For example, if the Starting IP address is 192.168.0.103 and
the Ending IP address is 192.168.0.107, the storage system
will allocate the IP addresses 192.168.0.103, 192.168.0.104,
192.168.0.105, 192.168.0.106, and 192.168.0.107 to the first
five computers that try to obtain their IP addresses from the
storage system. As soon as one of those computers shuts
down or otherwise loses its network connection, that
IP address will be assigned to the next computer that tries to
obtain its IP address from the storage system.
If you do not want to use the storage system as a DHCP server,
clear the Enable DHCP server check box. (If Get an IP
address automatically is selected, you cannot use the
storage system as a DHCP server.)
Intel® Entry Storage System SS4000-E User Guide
Do this