Intel D39172-003 User Manual page 182

Troubleshooting
www.DataSheet4U.com
166
To reset the recovery password in the Microsoft iSCSI Initiator*:
1. Click Start --> Programs --> Microsoft iSCSI Initiator --> Microsoft iSCSI
Initiator.
2. Click the Targets tab.
3. If more than one target appears in the Targets list, select the one that contains the
name of the storage system.
The Status should be Disconnected.
4. Click Log On.
5. Click Advanced.
6. Select the CHAP logon information check box.
7. In the User name text box, type your computer name in all capital letters.
8. In the Target secret text box, type the recovery password that you specified on the
storage system.
9. Click OK on the Advanced Settings and Log On to Target dialog boxes.
The Status of the target should now be Connected.
10. Click OK on the iSCSI Initiator Properties dialog box.
Intel® Entry Storage System SS4000-E User Guide