Intel D39172-003 User Manual page 119

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
8. If you ever need to recover your disk using the recovery CD or remotely boot from a
backup on the storage system, you'll be prompted for a password. In the Recovery
password text box, enter the password that you'd like to use, enter it again in the
Retype your password text box, and then click Next.
Notes:
— The recovery password must be 12–16 characters long.
— The same password is used for all disks backed up to the same storage system. If
you subsequently protect a second disk using the same storage system, you will
not be prompted to provide this password again. However, if you protect a second
disk using a different storage system, you will be prompted to provide a password
for that storage system.
— You can change this password later using Intel® Client Backup and Recovery (as
described in "Changing the Recovery Password" on page
storage system (as described in "Changing the Recovery Password" on page
Protecting Local Disks
108) and using the
55).
103