Intel D39172-003 User Manual page 145

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
4. Take the desired action:
To do this
Add the disk to a linear configuration or
use it as a spare for a normal three-disk
RAID 5 configuration
Add the disk to the storage system but not
add it to the RAID at this time
Return to the previous page (for example,
to re-scan the storage system)
Adding or Replacing Hard Disks
Do this
Click Add.
The Disks page indicates the current state of the disk
configuration.
Click Ignore.
The Disks page lists the disk is part of the storage
system, but its status is New, indicating that it is not
being used.
If you subsequently reconfigure the disks (as
described in "Reconfiguring Your Storage System
Disks" on page 68), you will be able to use this new
disk.
Click Back.
129