Intel D39172-003 User Manual page 75

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
3. In the SMTP server name or IP address text box, enter the fully qualified domain
name or IP address of your e-mail server.
4. Specify where or not your e-mail server requires authentication by selecting or
clearing the SMTP server authentication check box.
If you select this option, you must enter a user name and password for logging into
that server in the User name and Password text boxes.
If you clear this option, no authentication will be performed.
5. If your e-mail server cannot use the default sender e-mail address
( ), or if you want the individuals who receive e-mail notifications
root@localhost
to be able to reply to the alert, enter the address that you want to appear as the return
address in the Sender e-mail address text box.
For example, you could enter your own e-mail address (such as
MyName@MyCompany.com).
6. In the First e-mail address text box, enter the e-mail address of an individual who
should receive e-mail notifications when a problem occurs.
The e-mail address can be up to 128 characters long and must include the @ symbol
(for example, MyName@MyCompany.com).
7. If you want e-mail notifications to be sent to other individuals as well, enter the
appropriate e-mail addresses in the Second e-mail address and Third e-mail address
text boxes.
8. Click Apply.
9. When the confirmation message appears, click OK.
10. To confirm that the configuration is correct, click Test E-mail, and click OK on the
confirmation message.
This sends a test message to the specified recipients. If they do not receive the test
message, make sure that all the entries on this page are correct. You might also have to
modify the network settings (such as the gateway to use). For information about
changing the network settings, refer to
Managing Your Storage System
"Changing the Network Settings" on page 64.
59