Intel D39172-003 User Manual page 81

Note: Changing the IP address or subnet mask can have several effects:
www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
•
Access to the Manager will be temporarily disrupted. If you access the Manager using
a Web browser and an IP address, you will need to use the new IP address. In
addition, if you added the storage system's IP address to a local hosts file or DNS
server, you must update the IP address in those resources.
•
Users who accessed the shared folders using the previous IP address will be
disconnected and must access them again using the new IP address (as described in
"Accessing Shared Folders" on page
•
Users running Intel® Client Backup and Recovery must restart that application. If a
backup or recovery was in progress and did not complete successfully, perform the
action again.
You can also configure the storage system to act as a DHCP server. In other words, the
storage system can assign IP addresses to other computers in your network, simplifying
the network configuration of each individual system.
In addition, your storage system can act as an FTP server. This allows all Windows or Mac
OS X users to use a Web browser to access the public folder. They can also access their
personal folder that was created automatically when their user name was added to the
storage system (as described in
to "Reconfiguring Your Storage System Disks" on page
To change any of the network settings:
1. In the navigation bar, click Advanced.
2. In the left pane, click Network.
3. Make the desired changes:
To change this
The workgroup to which the
storage system belongs
The IP address(es) used by the
storage system
The IP address of the gateway
77).
"Adding Users" on page
In the Workgroup name text box, enter the name of the
workgroup.
This name can be up to 15 characters long.
In the Port 1 group box, either select Get an IP address
automatically to obtain the IP address from your DHCP
server, or select Use this IP address and enter the IP address
and subnet mask in the subsequent text boxes.
If you're using the second Ethernet port, do the same in the
Port 2 group box.
If your network includes a gateway, and if the first port on the
storage system uses a specified IP address rather than
obtaining one from the DHCP server, enter the IP address of
the default router in the Gateway IP address text boxes. (This
is typically the same IP address as the first port, with the last
number being 1.)
If your network does not include a gateway, or if the first port
obtains its IP address from the DHCP server, leave these text
boxes blank. (If the first port obtains its IP address from a
DHCP server, the gateway will obtain its IP address from the
DHCP server as well.)
Managing Your Storage System
32). for more information, refer
68.
Do this
65