Drum; Air Seals And Drum Shaft Supports; Rear Air Seal; Rear Drum Support - Electrolux EDR1000NEW Service Manual

6.3 Drum

1 – Front flange
2 – Drum housing
3 – Rear flange
4 – Drum lifters
5 - Plastic band
The drum consists of two half-shells (front and rear) which are joined together by a wide plastic band (5).
Separation of the drum into two parts allows the conductimetric sensor to determine the conductivity of the
washing inside the drum.
Parts 1, 2 and 3 are connected by crimping.
The plastic lifters are secured by screws to the internal wall of the drum.
The various elements which make up the drum are in sheet steel.
The rear drum shaft is fitted to the rear flange using eyelet rivets.

6.4 Air seals and drum shaft supports

6.4.1

Rear air seal

1 - Rear seal (fitted to rear panel)
2 - Drum
3 - Rear panel
6.4.2

Rear drum support

4 – Anti-clutching washer
5 – Fixing ring (Benzing)
6 – Rear panel
7 – Drum spindle
8 – Support with bushing (fitted to the rear panel)
6.4.3

Front drum support and air seal

9 – Drum
10 – Felt ring with tubular support
11 – Duct
6.4.4

Lower drum support

9 – Drum
10 – Felt ring with tubular support
11 – Duct
12 – Drum support roller
SOI/DT 2003-12 dmm 17/50 599 36 20-08