Table of Contents
Advertisement
■ Sending DSC calls (other)
NOTE: To ensure proper DSC operation, be sure to correctly adjust the "CH 70 SQL
Level" item on the Menu screen. (p. 43)
D Sending an Individual call
An Individual call enables you to send a DSC signal to only a specific station. You can
communicate after receiving the Acknowledgement "Able to comply."
1.
Push
.
• The "Compose Other" screen is displayed.
L You can also display the "Compose Other" screen by
selecting the "Compose Other" item on the Menu screen.
2.
Select "Message Type," and then push [ENT].
3.
Select "Individual," and then push [ENT].
• Returns to the "Compose Other" screen.
4.
Select "Address," and then push [ENT].
5.
Select the station to send an Individual call to, and then
push [ENT].
• Returns to the "Compose Other" screen.
L You can also select "Manual Input" to manually enter the
target station ID.
6.
Select "Channel," and then push [ENT].
7.
Select a channel to assign, and then push [ENT].
L The assigned channels are preset by default.
8.
Push
to send the Individual call.
• "Transmitting Individual Call" is displayed, and then "Waiting
for ACK" is displayed.
L If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
9.
When you receive an Acknowledgement "Able to comply":
• An alarm sounds.
• The screen to the right is displayed.
10. Push
• The channel assigned in step 7 is automatically selected.
L If the called station cannot use the channel that you
assigned, a different channel is selected by the other
station.
11. Hold down [PTT] to communicate.
TIP: If you received an Acknowledgement "Unable to
comply":
1.
Push
• The Acknowledge information is displayed.
2.
Push
operating screen.
to turn OFF the alarm.
to turn OFF the alarm.
, and then
to return to the
DSC OPERATION
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
28
Advertisement
Table of Contents
