3.19 CASING REMOVAL.
To facilitate boiler maintenance the casing can be completely
removed as follows:
• Lower grid (Fig. 40).
1) Loosen the screws (2).
2) Remove the grid (1).
• Front panel (Fig. 41).
3) Remove the cover caps (3) and loosen the screws (4).
4) Tilt the control panel (5) towards you.
2
56
2
1
X
8
9
X
8
7
6
6
• Casing (Fig. 42).
5) Remove the screws (6) that lock the front casing (7) and the
two sides (9).
6) Pull the front casing slightly (7) in the lower part towards
yourself and push upwards at the same time.
7) Loosen the screws (8) on the sides (9).
8) Remove the sides by pulling them towards you in order to
extract them from the 2 rear seats (Ref. X).
4
3
5
40
Ref. X
Rif. X
8
6
4
3
X
X
8
9
X
X
41
42
Need help?
Do you have a question about the VICTRIX EXA 24 X 1 ERP and is the answer not in the manual?