ICDM-RX/TCP (DeviceMaster) and ICRPC (RocketPort EXPRESS)
Windows Driver Installation
4.9. Enabling Secure Data Mode
In addition to enabling SSL mode in the driver, you must Enable Secure Data Mode in the NS-Link web page.
Use the following procedure to implement the Enable Secure Data Mode option.
1. Access the NS-Link web page using one of these methods:
•
Open your web browser, enter the IP address, and click enter.
•
Right-click the DeviceMaster in the Device Tree or Device List pane in PortVision DX and click
Webpage.
2. Click the Network tab.
3. Click the Security tab.
4. Click Enable Secure Data Mode.
5. Optionally, set other security options and then click Save.
6. Click Keys/Certs to configure your security key and certificate.
58