Using The Driver In Ipv4 Mode - Pepperl+Fuchs ICDM-RX/TCP Manual

ICDM-RX/TCP (DeviceMaster) and ICRPC (RocketPort EXPRESS)
Windows Driver Installation

4.4.4. Using the Driver in IPv4 Mode

After associating the DeviceMaster with the MAC address you can set the DeviceMaster to run in IPv4 Mode.
1. First associate a MAC address (Page 36) to the DeviceMaster.
2. Highlight the DeviceMaster.
3. If the DeviceMaster is not on the same network segment, enter the IP address of the DeviceMaster in the IP
Mode text box.
If the DeviceMaster is on the same network segment, the driver populates the IP Mode text box with the
DeviceMaster IP address.
4. Click the IPv4 Mode radio button.
5. If you do not have any other configuration changes, click Apply. If you have other configuration changes,
refer to the appropriate subsection:
• Enabling SSL on Page 41
• Configuring Device Settings on Page 43
39