Installation Setup Wizard - Pepperl+Fuchs ICDM-RX/TCP Manual

ICDM-RX/TCP (DeviceMaster) and ICRPC (RocketPort EXPRESS)
Windows Driver Installation

3.2. Installation Setup Wizard

You can use the following procedure to install the device driver for DeviceMaster or RocketPort, which is used to
configure the driver.
Note: Most installation steps are the same for the DeviceMaster and RocketPort. Some procedures are
specific to the products and are identified accordingly.
1. Download the appropriate device driver from https://www.pepperl-fuchs.com for your product and copy it to
a location that is available to the host.
Note: Administrative privileges are required to install device drivers on Windows operating systems.
2. Close any applications that are using serial ports before the device driver installation.
3. RocketPort:
a. Install the adapter and connect the interface (Quadcable, Octacable, or breakout box). If you need
hardware installation procedures. You can download the ICRPC and ICRPB (RocketPort EXPRESS)
Hardware Installation Manual.
Do not connect RS-422/485 devices until the appropriate port interface type has been
configured in the device driver.
Caution
b. Click Cancel if a Found New Hardware message appears.
4. Start the installation by executing the .exe file for your device.
5. If necessary, click the Yes button to the Do you want to allow this app to make changes to your device
message.
18