Table of Contents
Advertisement
ICDM-RX/TCP (DeviceMaster) and ICRPC (RocketPort EXPRESS)
Windows Driver Installation
•
Configure any of the DeviceMaster ports as sockets, see Configuring DeviceMaster Ports as Sockets
on Page 56.
•
Enable Secure Data Mode in the NS-Link web page, see Enabling Secure Data Mode on Page 58.
4.5. Configuring Device Settings
Use the following procedure to change device settings using the Windows Driver Management Console
1. Open Windows Driver Management Console.
2. Highlight the DeviceMaster or RocketPort device name that you want to configure.
3. If desired, change the User-Friendly Device Name.
4. RocketPort:
a. If desired, set a Starting COM Port number value.
b. Select the Driver's Working Mode.
c. Optionally, select a different Scan Rate (ms) (Page 44).
43
Advertisement
Table of Contents
Troubleshooting
