Standard Accessories; How To Use Switches, Handles, And Operation Levers - Ulvac VPC-051A User Manual

5. Standard Accessories

1) Power supply cable
2) Plug adapter
3) Gauge port cork
4) Flange cap
5) Screw for flange
6) User's manual
7) Vacuum
performance test
result table
Refer to the specification sheet for special models.

6. How to Use Switches, Handles, and Operation Levers

Before handling switches, handles, or operation levers, confirm the safety
and conditions.
Confirm
Name
MAIN switch
AUTO switch
MAIN. P lamp
BACK.P lamp
OK lamp
Main valve handle
Three-way valve
VENT. V
- For the main unit: 100 V single-phase, with plug, 2 m
- Plug with grounding wire for 100-V power supply
- For φ18
- For 25A
- Hexagon head bolt: M8×30
- Flat washer: M8
- Spring washer: M8
- Hexagon nut: M8
- Standard paper
- Standard paper
Manual ON-OFF Earth leakage breaker
Manual ON-OFF ON: lamp illumination
Manual ON-OFF ON: lamp illumination
Counter clockwise: OPEN Clockwise: CLOSE
Complete open: Turn the handle 90 degrees
Complete close: Turn the handle 90 degrees
Lever operation to the direction or FORE,
CLOSE, or ROUGH.
Screw tightening type
OPEN: Counter clockwise CLOSE: Clockwise
４
How to Operate
counter clockwise.
clockwise.
1 pc.
1 pc.
2 pc.
1 pc.
4 pc.
8 pc.
4 pc.
4 pc.
1 pc.
1 pc.