Table of Contents
Advertisement
1.2 Components
This attachment is made up of the basic unit and valve unit.
Change the check valve attached to the exhaust port of your dry pump with the valve unit
and connect respective ports to the basic unit. All you do is just start the basic unit, and the
power consumption will be reduced by 80% in maximum.
1.3 Accessories
Unpack the case and check the attachment to see if any part is damaged in transit.
Also check accessories against the following list of components.
Basic unit
Valve unit
Power connector
Controlling connector
Connecting tube
N2-1-3/8 (O.D. 9.53mm, I.D. 6.99mm), Nitta Corporation
Instruction manual
＊If any problem is found, contact your local ULVAC representative within a week after
receipt of this attachment.
1.4 Specifications
Model
Specifications
Power
Maximum apparent
power
Power consumption
Connector
Control
Input
Output
Connector
Operation
Display
Dimensions
Overall
Weight
Connecting port
Piping
Component
100 to 220VAC single phase, 50/60Hz
（automatically changed over）
250 VA
65 W （Process gas plus dry pump purge gas 0.0SLM）
Receptacle：CE05-2A10SL-3PC-B
Compatible connector：CE05-6A10SL-3SC-B-BSS)
Manufacturer：Dai-Ichi Electronics
Remote start/stop （contact 24 VDC）
Provide a no-voltage contact with a contact capacity of
2.0 A or less
Close : Start
Overcurrent alarm output (contact no voltage)
Contact capacity： 24 VDC, 1.0 A
Receptacle：17JE-13090-02(D1)
Compatible connector：17JE-23090(D8A)
Manufacturer：Dai-Ichi Electronics
Manual start switch
Run time is displayed on LCD
Basic unit : 175 × 310 × 240 mm
Valve unit : φ70 × 110 mm (NW40)
Basic unit : 9.2 kg,
Basic unit：G1/4 (Inlet, Outlet)
Valve unit：φ9.52, BA tube (Inlet, Outlet)
Length 3.0 m or less, φ9.52 mm or more
2
Quantity
1 copy
ES10
Open : Stop
Valve unit : 800 g
Instruction Manual ECO-SHOCK
1 pc.
1 pc.
1 pc.
1 pc.
6 m
Advertisement
Table of Contents
