Control Connections - Delta DIJITAL PROJECTION M-Vision 21000 II WUXGA Series Important Information Manual

Control connections

Control connections
1. Trigger
The trigger output can be used to control an electrically operated screen. The
screen will be automatically deployed when the projector starts up and
retracted when the projector shuts down.
2. USB
USB 5V / 2A output. Connect a USB cable to supply power to an external
device.
3. RS232
All of the projector's features can be controlled via a serial connection, using
commands described in the Protocol Guide. Use a crossover cable to connect
directly to a computer.
4. Ethernet/Art-Net
Ethernet
l
The projector's features can be controlled via a LAN connection. For
example using Digital Projection's Projector Controller application, a
terminal-emulation program or PJ-Link.
Art-Net
l
Art-Net compatible RJ45 etherCON input. Connect an etherCON
connector cable from an Ethernet LAN/WLAN network to receive DMX-
512 data over an IP-based network.
5. Wired Remote
The remote control can be connected using a standard 3.5 mm mini jack cable
(tip-ring-sleeve, or TRS).
Important Information
Digital Projection Ltd.
1 2 3
M-Vision 2X000 Series WUXGA
4 5
Rev A December 2023
page 45