Table of Contents
Advertisement
M-Vision 2X000 Series WUXGA
Ensure that the power outlet includes a Ground connection, as this
equipment MUST be earthed.
Take care to prevent small objects such as paper or wire from falling into
the projector. If this does happen, switch off immediately, and have the
objects removed by authorized service personnel.
Do not expose the projector to rain or moisture, and do not place any liquids
on top of the projector.
Unplug before cleaning, and use a damp, not wet, cloth.
Do not touch the power plug with wet hands.
Do not touch the power plug during a thunder storm.
Handle the power cable carefully and avoid sharp bends. Do not use a
damaged power cable.
Do not touch the ventilation outlets, as they will become hot in use.
Do not cover or obstruct the ventilation outlets or inlets.
Do not cover the lens whilst the projector is switched on. This could cause a
fire.
Always allow the projector to cool for 5 minutes before disconnecting the
power or moving the projector.
Never use strong detergents or solvents such as alcohol or thinners to
clean the projector and lens.
Rev A December 2023
page 12
General Precautions
Important Information
Digital Projection Ltd.
Advertisement
Table of Contents
