Delta DIJITAL PROJECTION M-Vision 21000 II WUXGA Series Important Information Manual page 52

M-Vision 2X000 Series WUXGA
10. EXIT
Exits the current OSD page
and enters the level above.
Exits the OSD when at the top
level OSD page.
11. INFO
Press and hold for 5 seconds
to activate or deactivate the
LCM.
Press to change pages when
the LCM is active.
12. ZOOM
Press this button, then press
an up or down arrow button to
adjust the zoom. Press EXIT to
exit the zoom mode.
Rev A December 2023
page 52
Operating the projector
Control Panel
Important Information
Digital Projection Ltd.
10
11
12