Table of Contents
Advertisement
Operating the projector
Projector indicators
1. LCM
Displays information about the
current state of the projector.
2. TEMP
Off = no error
Flashing red = temperature
error
3. POWER
Off = the projector is switched
off
Flashing green = the projector
is warming up
Flashing amber = the projector
is cooling down
On, green = the projector is
switched on
On, amber = the projector is in
network standby mode
On, red = the projector is in power saving standby mode
4. LIGHT
Off = light source is switched off
On, amber = light source is on (forced ECO mode)
On, green = light source is switched on
Flashing red (cycle of single flashes)
= failed to light up during power up
Flashing red (cycles of double flashes)
= light source failed while projector is on
Flashing green (cycles of single flashes)
= light source is temporarily off as PIC Mute is activated
5. STATUS
Off = no error
On, amber = firmware update mode
On, red = system error
Flashing green (cycles of double flashes) = lens calibration mode
Flashing amber (cycles of double flashes) = request to recalibrate the lens
Flashing red (cycle of single flashes) = cover error
Flashing red (cycles of double flashes) = TEC/Color sensor problem
Flashing red (cycles of four flashes) = fan error
Important Information
Digital Projection Ltd.
M-Vision 2X000 Series WUXGA
1
2
3
4
Indicators
5
Rev A December 2023
page 53
Advertisement
Table of Contents
