Introduction; Symbols Used In This Document - Delta DIJITAL PROJECTION M-Vision 21000 II WUXGA Series Important Information Manual

Introduction

Introduction
Congratulations on your purchase of this Digital Projection product.
The information in this document is relevant for the following products:
M-Vision 21000 II Series WUXGA (EMEA and China)
l
M-Vision 21000 II Series WUXGA (USA TAA compliant)
l
M-Vision 21000 II Series WUXGA (USA TAA compliant - REF)
l
M-Vision 24000 Series WUXGA (EMEA and China)
l
M-Vision 24000 Series WUXGA (USA TAA compliant)
l
M-Vision 24000 Series WUXGA (USA TAA compliant - REF)
l
M-Vision 27000 Series WUXGA (EMEA and China)
l
M-Vision 27000 Series WUXGA (USA TAA compliant)
l
M-Vision 27000 Series WUXGA (USA TAA compliant - REF)
l
This projector is a Laser Risk Group 2 product when a lens with a throw ratio
less than 1.2: 1 is installed. It becomes Laser Risk Group 3 when a lens with a
throw ratio greater than 1.2 :1 is installed. Additional installation and
operational precautions must be followed when the projector is classed as
Laser Risk Group 3. This information is provided in this document and in the
User Manual.
Please note that the REF model is always classed under Laser Risk Group 2.

Symbols used in this document

Some information in this document may be accompanied by the following symbols:
LASER WARNING: this symbol indicates that there is a potential hazard of
eye exposure to laser radiation unless the instructions are closely followed.
ELECTRICAL WARNING: this symbol indicates that there is a danger of
electrical shock unless the instructions are closely followed.
WARNING: this symbol indicates that there is a danger of physical injury to
yourself and/or damage to the equipment unless the instructions are
closely followed.
NOTE: this symbol indicates that there is some important information that you
should read.
Important Information
Digital Projection Ltd.
M-Vision 2X000 Series WUXGA
Rev A December 2023
page 3