Removing The Lens - Delta DIJITAL PROJECTION M-Vision 21000 II WUXGA Series Important Information Manual

Fitting a lens

Removing the lens

1. Push the lens release button
all the way in
2. Turn the lens anti-clockwise
until it disengages
3. Slowly remove the lens
4. Fit lens caps to the front and
rear of the lens
5. Fit a lens aperture cap or a
new lens to the projector. See
Inserting a new lens on the
previous page for guidance on inserting a lens.
Important Information
Digital Projection Ltd.
M-Vision 2X000 Series WUXGA
1 2 3
Rev A December 2023
page 39