Fitting A Lens - Delta DIJITAL PROJECTION M-Vision 21000 II WUXGA Series Important Information Manual

Fitting a lens

Fitting a lens
The projector must be fully turned off prior to attempting a lens change.
When changing the lens, avoid using excessive force as this may damage
the equipment.
Avoid touching the surface of the lens as this may result in image
impairment.
The lens is shipped separately.
Take care to preserve the original lens packaging and protective caps for future
use.
The projector will not power on without the lens fitted.
The following lenses are available for this projector:
Lens Throw ratio
0.38 : 1
0.90 - 1.20 : 1 zoom
1.20 - 1.56 : 1 zoom
1.50 - 2.00 : 1 zoom
2.00 - 4.00 : 1 zoom
4.00 - 7.00 : 1 zoom
6.90 - 10.30 : 1 zoom
Please refer to the user manual for details about each lens.
Important Information
Digital Projection Ltd.
M-Vision 21000 II Series WUXGA
M-Vision 24000 Series WUXGA
M-Vision 27000 Series WUXGA
(EMEA and
China)
ü
ü
ü
ü
ü
ü
ü
(USA TAA (USA TAA compliant -
compliant)
ü
ü
ü
ü
ü
ü
ü
M-Vision 2X000 Series WUXGA
REF)
ü
ü
ü
ü
ü
N/A
N/A
Rev A December 2023
page 37