Table of Contents
Advertisement
Micro PDF417 Set Length 2
This feature specifies one of the bar code lengths for
label length if in Variable Length Mode, or the second fixed length if in Fixed Length includes the bar code's data
characters only. Characters can be set from 0001 to 0366 characters (pad with zeroes) in increments of 01. Any
value greater than 0366 will be considered to be 0366.
See
page 217
for detailed instructions on setting this feature.
$CMIL2
Select Micro PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
DEFAULT
Micro PDF417 Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
Length 2 is 0366 Characters
Enter/Exit Programming Mode
Control. Length 2 is the maximum
representing your
CANCEL
193
Advertisement
Table of Contents
