Table of Contents
Advertisement
Enter/Exit Programming Mode
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for
maximum label length if in
includes the bar code's data characters only. The length can be set from 1 to 74 characters. A setting of 0 specifies
to ignore this length (only one fixed length).
Table 18
provides examples for setting Length 2. See
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
156
Variable Length
Mode, or the second fixed length if in
00 (ignore sec-
ond length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
GS1 DataBar™ Expanded Length
page 217
for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
74 = Length 2 is 74 Characters
Control. Length 2 is the
Fixed Length
Mode. Length
52 Characters
74 Characters
'5' and '2'
'7' and '4'
CANCEL
QuickScan™ I QD24XX
Advertisement
Table of Contents
