Table of Contents
Advertisement
Code 39 Set Length 2
This feature specifies one of the bar code lengths for
length if in
Variable Length
code's check, data, and full-ASCII shift characters. The length does not include start/stop characters.
Table 4
provides examples for setting Length 2. See
Table 4. Code 39 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC3L2
Select Code 39 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode, or the second fixed length if in
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 39 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING .MODE
DEFAULT
Code 39 Length
Control. Length 2 is the maximum label
Fixed Length
page 217
for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Mode. Length includes the bar
15 Characters
50 Characters
'1' and '5'
'5' AND '0'
CANCEL
109
Advertisement
Table of Contents
