Table of Contents
Advertisement
Enter/Exit Programming Mode
Industrial 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
label length if in
Variable Length
bar code's check, data, and full-ASCII shift characters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table 12
provides examples for setting Length 2. See
Table 12. Industrial 2 of 5 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CU2L2
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
136
Mode, or the second fixed length if in
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Industrial 2 of 5 Length
Fixed Length
page 217
for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Control. Length 2 is the maximum
Mode. Length includes the
15 Characters
50 Characters
'1' and '5'
'5' AND '0'
CANCEL
QuickScan™ I QD24XX
Advertisement
Table of Contents
