Table of Contents
Advertisement
Codabar Set Length 2
This feature specifies one of the bar code lengths for
the maximum label length if in
length includes the bar code's start, stop, check and data characters. The length must include at least one data
character.
The length can be set from 3 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table 14
provides examples for setting Length 2. See
Table 14. Codabar Length 2 Setting Examples
STEP
ACTION
Desired Setting (and pad
1
with leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CCBL2
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
Mode, or the second fixed length if in
00 Ignore This
Length
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABAR LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Codabar Length ControlCodabar Length
page 217
for detailed instructions on setting this feature.
EXAMPLES
07 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Control. Length 2 is
Fixed Length
15 Characters
50 Characters
'1' and '5'
'5' AND '0'
CANCEL
Mode. The
143
Advertisement
Table of Contents
